How do I pour the epoxy on an Epoxy Pour Table?

Jun 09, 2025

Leave a message

Hey there! As a supplier of Epoxy Pour Tables, I'm stoked to share with you the ins and outs of pouring epoxy on an Epoxy Pour Table. It's a pretty cool process that can turn a regular table into a stunning piece of art. So, let's dive right in!

Getting Prepared

First things first, you gotta get all your stuff ready. You'll need epoxy resin, a hardener, measuring cups, stir sticks, a heat gun or torch, a tabletop (obviously), and some masking tape. Make sure you're working in a well - ventilated area, 'cause the fumes from the epoxy can be a bit strong.

I always recommend using high - quality epoxy. There are different types out there, but for an Epoxy Pour Table, you want one that's clear, durable, and has a long working time. This gives you enough time to work with it before it starts to harden.

Prepping the Table

Before you start pouring the epoxy, you need to prep the table. Sand the surface to make it rough. This helps the epoxy stick better. Wipe away any dust with a clean, dry cloth. You can also use a tack cloth to make sure there's no debris left on the table.

Next, use masking tape to cover the edges of the table. This keeps the epoxy from dripping over the sides while you're pouring. It's a simple step, but it can save you a lot of cleanup later.

Mixing the Epoxy

Now, it's time to mix the epoxy and the hardener. Read the instructions on the product carefully, 'cause the mixing ratio can vary from one brand to another. Usually, you'll have to mix them in a specific ratio, like 1:1 or 2:1.

34

Use separate measuring cups for the epoxy and the hardener. Pour the right amounts into a clean container. Then, use a stir stick to mix them thoroughly. Make sure you scrape the sides and the bottom of the container to get all the epoxy and hardener mixed in. Keep stirring for at least 3 - 5 minutes. This ensures that the mixture is homogenous.

Pouring the Epoxy

Once the epoxy is mixed, it's time to pour. Start by pouring a small amount of epoxy in the center of the table. Then, slowly spread it out towards the edges using a stir stick or a squeegee. Work in sections, making sure to cover the entire surface evenly.

If you're adding colors or effects to your epoxy, now's the time to do it. You can use epoxy pigments or dyes to create different looks. Just drop a few drops of the color into the epoxy and use a stir stick to swirl it around.

As you're pouring, keep an eye out for air bubbles. They can ruin the look of your finished table. You can use a heat gun or a torch to pop the bubbles. Just wave the heat gun or torch a few inches above the epoxy surface. The heat will make the bubbles rise to the top and pop.

Second Pour (Optional)

Depending on how thick you want your epoxy layer to be, you might need to do a second pour. Wait for the first layer to start to set, but not fully harden. This usually takes a few hours, but check the product instructions for the exact time.

When it's time for the second pour, repeat the mixing and pouring process. Make sure to pour the second layer evenly over the first one. Again, use a heat gun to get rid of any air bubbles.

Curing the Epoxy

After you've finished pouring the epoxy, let it cure. The curing time can vary depending on the type of epoxy you're using and the temperature and humidity of your workspace. In general, it can take anywhere from 24 hours to a few days for the epoxy to fully cure.

During the curing process, make sure the table is in a flat position. You don't want the epoxy to pool in one area. Also, avoid touching the surface until it's fully cured.

Finishing Touches

Once the epoxy is fully cured, you can remove the masking tape. You might notice some rough edges or drips. You can sand these down using fine - grit sandpaper to give the table a smooth finish.

Now, your Epoxy Pour Table is ready to be used or displayed. It's a unique piece that can add a modern and stylish touch to any room.

Our Product Range

At our supply, we offer a variety of tables that can be used for epoxy pouring. Check out our Modern Stylish Solid Wood Round Dining Table. It's made of high - quality solid wood and provides a great base for your epoxy project.

We also have the Crystal Stone Table. The smooth surface of the crystal stone looks amazing when combined with epoxy.

And of course, our Liquid Glass Epoxy Pour Table is specifically designed for epoxy pouring. It comes in different sizes and shapes to suit your needs.

Contact Us for Purchase

If you're interested in our Epoxy Pour Tables or have any questions about the epoxy pouring process, feel free to reach out. We're always happy to help you with your project. Whether you're a DIY enthusiast or a professional furniture maker, we can provide you with the best products and advice.

References

  • Epoxy Resin Manufacturer's Instructions
  • DIY Epoxy Pour Table Tutorials from Online Communities